Multilon®
1. Feature
Multilon®, developed by Teijin Chemicals PC / ABS polymer alloy system is. Multilon® polycarbonate (PC) and ABS which combines the Feature, electrical and electronics, OA equipment, lighting equipment, precision machinery, auto parts, are used in diverse areas of household goods.
Multilon®
2. List of grades
List of grades
Series Type Grade Explain Features
Standard
series		 General T-3750

Typical PC / ABS Polymer Alloy
PPE and heat denaturation compared to ABS and excellent balance of heat shock.
The fluidity and heat resistance than ABS.

 UL94 HB
Flame resisting grade TN-3000V UL94 V-0
TN-3411V UL94 V-0
Persistent anti-static grade T-3615Q

Have made the grade antistatic antistatic polymer itself.
The surface resistance of 10 10 ~ 10 11 and excellent antistatic performance continues Ω.

 UL94 HB
TN-3616Q UL94 V-0
Autobobile
series		 General T-2711J Standard grade with excellent light resistance and impact resistance.
Heat-resistant ABS showed better heat resistance, high impact shows -30℃ under low temperature.		 High Impact / High Temperature
T-2754 High flow / high impact
Plating MK-1000A Plating grade fatigue excellent dimensional stability, impact resistance and heat resistance.
Outer and Innadoahandoru are widely used in products such as decorative panel plating.
ABS can be plated with the plating process.		 UL94 HB
Non-halogen
Flame Series
Housing		 General TN-7000 Impact resistance / heat / molding grade highly. UL94 V-0/5V
High flow TN-7500 Outstanding grade liquidity.
OA, especially suitable for housing equipment.		 UL94 V-0/5V
High rigidity TN-7000F Has a high rigidity, OA thinner to allow the housing of the device.
TN-7100F also has excellent impact resistance.		 UL94 V-0/5V
TN-7100F UL94 V-0/5V
TN-3712B UL94 V-0/5V
TN-3713B UL94 V-0/5V
TN-3715B UL94 V-0/5V
High flow / high rigidity TN-7500F Has a high rigidity and excellent liquidity, OA thinner to allow the housing of the device. UL94 V-0/5V
Filler reinforcement DN-3710F By adding the inorganic filler is improved rigidity grade.
It has a high rigidity and fluidity, OA enables thinner and equipment products.		 UL94 V-0/5V
10% filler contains
DN-3720F UL94 V-0/5V
20% filler contains
Non-halogen
Flame resistance series
Chassis		 Filler reinforcement DN-7720D By adding the inorganic filler is improved rigidity grade.
Chassis for optical dimensional accuracy is required, forming anisotropy, and improved dimensional stability.		 UL94 V-1/5V
20% filler contains
DN-7730M UL94 V-1/5V
30% filler contains
General Grade
Property Unit

Test

method

Measurement

condition

 Standard series
T-3750
(General）		 TN-3000V
（General, Flame resistance）		 TN-3411V
（General, Flame resistance）		 T-3615Q
(Persistent anti-static)		 TN-3616Q
(Persistent anti-static flame retardant)
Density kg/m3 ISO 1183 - 1,130 1,190 1,180 1,130 1,210
Tensile modulus MPa ISO 527-1
and
ISO 527-2 		1mm/min 2,250 2,550 2,650 1,760 1,760
Yield stress in tension MPa 50mm/min
*5mm/min		 55 60 65 45 45
Tensile fracture stress MPa 50 50 50 50 45
Tensile yield strain % 5 2 3 3 3
Strain at break % 80 75 110 120 120
Tensile modulus MPa ISO 178 2mm/min 2,300 2,600 2,800 1,800 1,800
Tensile strength MPa 83 95 95 70 74
Charpy impact strength kJ/m2 ISO 179 Un-notched NB NB NB NB NB
Notched 80 30 40 80 55
Deflection temperature under load ℃ ISO 75-1
and
ISO 75-2 		1.80MPa 100 103 93 93 97
0.45MPa 115 118 107 107 112
Vicat softening temperature ℃ ISO 306 50℃/h 50N 114 119 109 109 112
Mold shrinkage % In-house method Parallel(4mmt) 0.5～0.7 0.5～0.7 0.5～0.7 0.5～0.7 0.5～0.7
Vertical(4mmt) 0.5～0.7 0.5～0.7 0.5～0.7 0.5～0.7 0.5～0.7
Linear expansion coefficient ×10-4/℃ ISO 11359-2 Parallel 0.8 0.8 0.8 0.8 0.8
Vertical 0.8 0.8 0.8 0.8 0.8
Surface resistivity Ω IEC 60093 - 1016 1016 1016 1010～1011 1010～1011
Resistance to burning - UL 94 - HB(0.75mm)

V-2(0.75mm)

V-0(1.5mm)

V-0(1.5mm)

5VB(2.5mm)

 HB(1.5mm) V-0(1.5mm)
Automotive Grade
Property Unit

Test

method

Measurement

condition

 Automotive series
T-2711J
(General）		 T-2754
（High flow）		 MK-1000A
（Plating）
Density kg/m3 ISO 1183 - 1,140 1,110 1,120
Tensile modulus MPa ISO 527-1
and
ISO 527-2 		1mm/min 2,250 2,150 2,050
Yield stress in tension MPa 50mm/min
*5mm/min		 56 54 50
Tensile fracture stress MPa 48 48 42
Tensile yield strain % 3 3 3
Strain at break % 110 130 110
Flexural modulus MPa ISO 178 2mm/min 2,300 2,200 2,100
Flexural strength MPa 85 78 75
Charpy impact strength kJ/m2 ISO 179 Un-notched NB NB NB
Notched 80 107 60
Deflection temperature under load ℃ ISO 75-1
and
ISO 75-2 		1.80MPa 104 95 97
0.45MPa 124 118 121
Vicat softening temperature ℃ ISO 306 50℃/h 50N 122 114 116
Mold shrinkage % In-house method Parallel(4mmt) 0.5～0.7 0.5～0.7 0.5～0.7
Vertical(4mmt) 0.5～0.7 0.5～0.7 0.5～0.7
Linear expansion coefficient ×10-4/℃ ISO 11359-2 Parallel 0.8 0.8 0.8
Vertical 0.8 0.8 0.8
Surface resistivity Ω IEC 60093 - 1016 1016 1016
Resistance to burning - UL 94 - - - HB(1.5mm)
Housing / Chassis grade
Property Unit

Test

method

Measurement

condition

 Non-halogen flame retardant series
Housing Chassis
TN-7000
（General）		 TN-7500
（High flow）		 TN-7000F
（High rigidity）		 TN-7100F
（High rigidity）		 TN-7500F
（High flow / High rigidity）		 TN-3712B
（High rigidity）		 TN-3713B
（High rigidity）		 TN-3715B
（High rigidity）		 DN-3710F
（Filler reinforcement）		 DN-3720F
（Filler reinforcement）		 DN-7720D
（Filler reinforcement）		 DN-7730M
（Filler reinforcement）
Density kg/m3 ISO 1183 - 1,180 1,180 1,220 1,210 1,210 1,250 1,210 1,300 1,260 1,340 1,360 1,440
Tensile modulus MPa ISO 527-1
and
ISO 527-2 		1mm/min 2,600 2,600 3,300 3,300 3,300 4,100 3,050 4,700 4,200 6,100 6,500 9,000
Yield stress in tension MPa 50mm/min
*5mm/min		 63 63 63 62 62 *62 63 *70 *61 - *74 -
Tensile fracture stress MPa 48 47 46 46 48 *45 50 *50 *48 *60 *70 *68
Tensile yield strain % 3 3 2 2 2 *2 3 *2 *3 - *2 -
Strain at break % 80 50 20 50 30 *30 100 *20 *35 *5 *3 *2
Flexural modulus MPa ISO 178 2mm/min 2,600 2,600 3,200 3,200 3,200 4,000 3,000 4,600 4,100 5,400 6,200 8,000
Flexural strength MPa 95 95 96 94 96 90 90 105 94 100 115 100
Charpy impact strength kJ/m2 ISO 179 Un-notched NB NB NB NB NB NB NB NB NB 60 40 18
Notched 15 13 12 22 10 15 25 8 13 4 4 3
Deflection temperature under load ℃ ISO 75-1
and
ISO 75-2 		1.80MPa 84 80 84 83 80 85 84 85 83 83 110 108
0.45MPa 94 91 94 93 91 95 94 95 95 95 122 120
Vicat softening temperature ℃ ISO 306 50℃/h 50N 97 94 97 96 94 98 97 98 98 98 124 122
Mold shrinkage % In-house method Parallel(4mmt) 0.5～0.7 0.5～0.7 0.4～0.6 0.4～0.6 0.4～0.6 0.4～0.6 0.45～0.65 0.35～0.55 0.4～0.6 0.2～0.4 0.2～0.4 0.1～0.3
Vertical(4mmt) 0.5～0.7 0.5～0.7 0.4～0.6 0.4～0.6 0.4～0.6 0.4～0.6 0.45～0.65 0.35～0.55 0.5～0.7 0.3～0.5 0.3～0.5 0.2～0.4
Linear expansion coefficient ×10-4/℃ ISO 11359-2 Parallel 0.8 0.8 0.6 0.6 0.6 0.55 0.65 0.50 0.45 0.30 0.40 0.30
Vertical 0.8 0.8 0.7 0.7 0.7 0.55 0.65 0.50 0.70 0.65 0.48 0.35
Surface resistivity Ω IEC 60093 - 1016 1016 1016 1016 1016 1016 1016 1016 1016 1016 1016 1016
Resistance to burning - UL 94 - V-2(0.70mm)
V-1(1.2mm)
V-0(1.5mm)
5VB(2.0mm)		 V-1(1.2mm)
V-0(1.5mm)
5VB(2.0mm)

V-0(1.2mm)

5VB(1.8mm)

 V-1(1.0mm)
V-0(1.5mm)
5VB(1.8mm)

V-0(1.2mm)

5VB(1.8mm)

 V-1(1.0mm)
V-0(1.5mm)
5VB(2.0mm)		 V-1(1.0mm)
V-0(1.5mm)
5VB(2.0mm)		 V-1(1.0mm)
V-0(1.2mm)
5VB(2.0mm)		 V-1(1.0mm)
V-0(1.3mm)
5VB(1.8mm)		 V-1(1.0mm)
V-0(1.3mm)
5VB(1.8mm)		 ◎V-1(1.5mm)
◎5VB(2.0mm)		 ◎V-1(1.5mm)
◎5VB(2.0mm)
◎=Black ◎=Black

Multilon®
3. Impact strength and heat resistance
The equivalent resistance temperature Multilon ABS, impact modified PPE has excellent properties compared to.
Standard / Automotive
Housing
Multilon®
4. Antistatic Property
T-3615Q, TN-3616Q antistatic effect will persist even if the cleaning and washing clothes.
Multilon®
5. Flow property
Standard / Automotive
Housing / Chassis